Ucentral-client
Ucentral-client
show ucentral-client server configuration
[Command] show ucentral-client server configuration
[Purpose] The ucentral-client feature is used to connect the device to a unified controller platform, facilitating subsequent configuration viewing, configuration deployment, and unified management and topology planning. This show command is used to view the ucentral-client configuration. The service must be enabled and the corresponding controller IP address must be configured in advance.
[View] System view
[Use Cases]
sonic# show ucentral-client server configuration
ServerIP Vrf
------------ -------
52.76.134.89 defaultshow ucentral-client server status
[Command] show ucentral-client server status
[Purpose] To view the status of ucentral-client, the service must be enabled and the corresponding controller IP address must be configured in advance.
[View] System view
[Use Cases]
sonic# show ucentral-client server status
+--------------+-------------+
| ServerIP | status |
+==============+=============+
| 52.76.134.89 | connected |
+--------------+-------------+ucentral-client enable
[Command] ucentral-client enable
[Purpose] Enable Ucentral client service
[View] System configuration view
[Use Cases]
sonic(config)# ucentral-client enableucentral-client server string
[Command] ucentral-client server string
[Purpose] Configure Ucentral client controller IP
[Parameter]
Parameter | Description |
|---|---|
String | Configure the IP or URL of the controller |
[View] System configuration view
[Use Cases]
soni(config)# ucentral-client server 52.76.134.89