PPPoE Client Configuration
PPPoE Client Configuration
interface dialer dialer id
[Command] interface dialer dialer id
[Purpose] Configure dial-up interface ID
[Parameter]
Parameter | Description |
|---|---|
dialer id | id range：0~7 |
[View] System view
[Use Cases]
sonic# configure terminal
sonic(config)# interface dialer 1ppp chap username username password
[Command] ppp chap username username password
[Purpose] Configure PPP authentication username and password
[Parameter]
Parameter | Description |
|---|---|
username | username |
password | password |
[View] Dial up interface view
[Use Cases]
sonic# configure terminal
sonic(config)# interface dialer 1
sonic(config-dialerif-1)# ppp chap username test1 1234mru value
[Command] mru value
[Purpose] Set the maximum receive unit for the client, with a default of 1492. The final receive unit size will be determined through negotiation with the server's MRU value, typically based on the client's setting. The negotiated result can be verified by checking the final MTU value on the PPP interface using the ifconfig command.
[Parameter]
Parameter | Description |
|---|---|
value | range of configuration:1312~10218 |
[View] Dial up interface view
[Use Cases]
sonic# configure terminal
sonic(config)# interface dialer 1
sonic(config-dialerif-1)# mru 1400mtu MTU
[Command] mtu MTU
[Purpose] Configure MTU value
[Parameter]
Parameter | Description |
|---|---|
mtu | range of configuration:1312~10218 |
[View] Dial up interface view
[Use Cases]
sonic# configure terminal
sonic(config)# interface dialer 1
sonic(config-dialerif-1)# mtu 9216tcp-mss-clamp Value
[Command] tcp-mss-clamp Value
[Purpose] Configure tcp-mss-clamp value
[Parameter]
Parameter | Description |
|---|---|
tcp-mss-clamp | range of configuration:536~10178 |
[View] Dial up interface view
[Use Cases]
sonic# configure terminal
sonic(config)# interface dialer 1
sonic(config-dialerif-1)# tcp-mss-clamp 1500nat-zone id
[Command] nat-zone id
[Purpose] Configure nat zone
[Parameter]
Parameter | Description |
|---|---|
id | range of configuration:0~3 |
[View] Dial up interface view
[Use Cases]
sonic# configure terminal
sonic(config)# interface dialer 1
sonic(config-dialerif-1)# nat-zone 1pppoe-client id
[Command] pppoe-client id
[Purpose] Port binding pppoe client configuration
[Parameter]
Parameter | Description |
|---|---|
id | range of configuration:0~7 |
[View] Interface view
[Use Cases]
sonic# configure terminal
sonic(config)# interface ethernet 1
sonic(config-if-1)# pppoe-client 1