Device Management
Device Status
\[Command] show version \[Purpose] Show system version \[View] System view \[Notes] This command displays version information including software, description, kernel, create, and image. \[Use Cases] \[Command] show platform fan \[Purpose] View fan information \[View] System view \[Use Cases] Description of the show platform fan command output \[Command] show platform psu-status \[Purpose] View power status \[View] System view \[Notes] \[Use Cases] \[Command] show platform summary \[Purpose] View hardware platform information \[View] System view \[Use Cases] \[Command] show platform temperature \[Purpose] View hardware platform information \[View] System view \[Notes] \[Use Cases] \[Command] show image \[Purpose] Display the system's installed firmware \[View] System view \[Use Cases] \[Command] show feature state \[Purpose] Check if the feature is enabled \[View] System view \[Notes] The processes related to all features on the current system are running in the corresponding containers, and the corresponding containers will be started after the feature is enabled.
Device Configuration
\[Command] hostname hostname \[Purpose] Modify the device host name \[Parameter] \[View] System view \[Notes] The hostname can be named with a maximum of 64 characters and can only contain ". " , "-", "a-z", "A-Z" and "0-9".
NTP Configuration
NTP（Network Time Protocol）,is a protocol used to synchronize the time of individual computers in a network. \[Command] show ntp \[Purpose] Show NTP information \[View] System view \[Use Cases] \[Command] ntp server ip-address \[prefer] no ntp server ip-address \[Purpose] Configure NTP server \[Parameter] \[View] System configuration view \[Use Cases] \[Command] ntp source-interface interface-name \[vrf {default|mgmt}] no ntp source-interface interface \[Purpose] Specify the NTP source interface \[View] System configuration view \[Notes] Configuring the local source interface for sending/receiving NTP packets can help avoid using IP addresses from other interfaces on this device as the destination address for response packets.
System Time Configuration
\[Command] show clock \[Purpose] Display time zone and time \[View] System view \[Use Cases] \[Command] show supported-timezones \[Purpose] Display the time zones supported by the system configuration \[View] System view \[Use Cases] \[Command] clock datetime date string time string \[Purpose] Configure system time \[Parameter] \[View] System configuration view \[Usage Scenario] When preparing to deploy a device, it's essential to configure the system time of the device to the current actual time. This ensures that the device's logs and alarm messages accurately reflect the timestamp of events.
POE Configuration
\[Command] show interface poe \[Purpose] Display interface POE information \[View] System view \[Use Cases] \[Command] show interface poe diagnose \[Purpose] Display interface POE initialization information \[View] System view \[Usage Scenario] This command displays information including POE hardware version, POE status, current POE temperature, alarm temperature, and the number of internal POE resets. \[Notes] If the command results in a "device busy" message, it is normal.
CRM
\[Command] show crm summary \[Purpose] Display the summary information of CRM configuration \[View] System view \[Usage Scenario] When you want to view the resource statistics polling time configuration, you can do so by executing this command. \[Use Cases] \[Command] show crm thresholds {acl {counter|entry|group|table}|all|dnat|fdb|{ipv4|ipv6} {neighbor|nexthop|route}|nexthop group {member|object}|snat} \[Purpose] Display the threshold configuration of the CRM \[Parameter] \[View] System view \[Usage Scenario] When you want to view the threshold configuration of different types of resources, you can do so by executing this command.