Layer 3 Configuration
ARP/ND
\<font color="#1d05a2">Table 1 ARP View\</font> \[Command] show arp \[Purpose] Display ARP table entries. \[View] Privileged User View \[Use Cases] \[Command] clear neighbor all \[Purpose] Clear all ARP table entries.
Basic Routing
\<font color="#1d05a2">Table 1 Route View\</font> \[Command] show { ip | ipv6 } route \[ summary | connected | static | bgp | ospf | isis | ip-address ] \[Purpose] Display IPv4/IPv6 route info. \[Parameters] \[View] Privileged User View \[Use Cases] \[Command] show { ip | ipv6 } protocol \[Purpose] Display IPv4/IPv6 protocol info.
ECMP
\<font color="#1d05a2">Table 1 Load Balance Hash Key\</font> \[Command] hash mode { ipv4|ipv6|non-ip|ipv4-rdma|ipv6-rdma } hash key \[Purpose] Set load-balance and hash key. \[Parameters] \[View] Global Configuration View \[Notes] Set this parameter to modify the LAG and ECMP hash key.
BGP
\<font color="#1d05a2">Table 1 BGP View\</font> \[Command] show ip bgp neighbors \[ A. B.
OSPF
\<font color="#1d05a2">Table 1 OSPF View\</font> \[Command] show ip ospf neighbor \[ OPTIONs ] \[Purpose] Display OSPF neighbor information. \[Options] \[View] Privileged User View \[Use Cases] \[Command] show ip ospf route \[Purpose] Display OSPF route information.
IS-IS
\<font color="#1d05a2">Table 1 ISIS View\</font> \[Command] show isis neighbor \[Purpose] Display ISIS neighbor information. \[View] Privileged User View.
Routing Policy
\<font color="#1d05a2">Table 1 IP Prefix List View\</font> \[Command] show ip prefix-list \[ summary | detail | list name ] \[Purpose] Display IP prefix list configuration. \[Parameters] \[View] Privileged User View \[Use Cases] \<font color="#1d05a2">Table 2 IP Prefix List Config\</font> \[Command] ip prefix-list list name \[ seq sequence number ] { permit | deny } { any | A.
VRF
\<font color="#1d05a2">Table 1 VRF View\</font> \[Command] show vrf brief \[Purpose] Display VRF configuration. \[View] Privileged User View \[Use Cases] \[Command] show vrf interface \[Purpose] Display the binding relationship between VRFs and interfaces.
DHCP
\<font color="#1d05a2">Table 1 DHCP Relay View\</font> \[Command] show dhcp relay \[Purpose] Display DHCP Relay configuration. \[View] Privileged User View \[Use Cases] \<font color="#1d05a2">Table 2 DHCP Relay Config\</font> \[Command] feature dhcp state enable \[Purpose] Enable feature DHCP.