Layer 2 Configuration
MAC
\<font color="#1d05a2">Table 1 MAC View\</font> \[Command] show mac-address \[{ ethernet | link-aggregation } interface name | all ] \[Purpose] Display MAC address table. \[Parameters] \[View] Privileged User View \[Use Cases] \[Command] clear mac-address \[{ ethernet | link-aggregation } interface name | vlan vlan-id ] { static | dynamic | all } \[Purpose] Clear MAC entries.
VLAN
\<font color="#1d05a2">Table 1 VLAN View\</font> \[Command] show vlan summary \[Purpose] Display summary information about VLANs. \[View] Privileged User View \[Use Cases] \[Command] show vlan summary vlan-id \[Purpose] Display specific VLAN summary information.
L2PT
\<font color="#1d05a2">Table 1 L2PT Config\</font> \[Command] l2protocol-tunnel {stp|pvstp|cdp|lacp|lldp} enable \[Purpose] Enable STP|PVSTP|CDP|LACP|LLDP protocol tunnel \[View] Interface Configuration View \[Notes] Currently, only CX308P-48Y-NF ,CX532P-NF and CX732Q-N-V2devices support this feature. Execute the no l2protocol-tunnel {stp|pvstp|cdp|lacp|lldp} enable command to disable STP|PVSTP|CDP|LACP|LLDP protocol tunnel.
LAG
\<font color="#1d05a2">Table 1 LAG View\</font> \[Command] show link-aggregation summary \[Purpose] Display LAG configuration. \[View] Privileged User View \[Use Cases] \[Command] show { ip | ipv6 } interfaces \[Purpose] Display IP address configuration of lag interfaces.
LLDP
\<font color="#1d05a2">Table 1 LLDP View\</font> \[Command] show lldp neighbor { summary | interface interface name } \[Purpose] Display LLDP neighbors. \[Parameters] \[View] Privileged User View \[Use Cases] \[Command] show lldp local { summary | interface interface name } \[Purpose] Display LLDP configuration.
STP
\<font color="#1d05a2">Table 1 STP View\</font> \[Command] show mstp bridge \[Purpose] Display MSTI status. \[View] Privileged User View \[Use Cases] \[Command] show mstp brief \[{ ethernet|link-aggregation } interface name ] \[Purpose] Display information about the status of ports in CIST.