igmp-mld-snooping
Resources
Resource List
Path | Access |
|---|---|
/igmp-mld-snooping | Read-Write |
/igmp-mld-snooping/global | Read-Write |
/igmp-mld-snooping/global/enabled | Read-Write |
/igmp-mld-snooping/groups | Read-Write |
/igmp-mld-snooping/groups/group | Read-Write |
/igmp-mld-snooping/groups/group/dst-ip | Read-Write |
/igmp-mld-snooping/groups/group/src-ip | Read-Write |
/igmp-mld-snooping/groups/group/vlan | Read-Write |
/igmp-mld-snooping/groups/group/output-interfaces | Read-Write |
/igmp-mld-snooping/groups/group/output-interfaces/output-interface | Read-Write |
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/interface | Read-Write |
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/uvlan | Read-Write |
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/mode | Read-Write |
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/type | Read-Only |
/?/vlans/vlan/igmp-mld-snooping | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/enable | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/fast-leave | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/proxy-enable | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/querier-enable | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/querier-ip | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/version | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/query-interval | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/query-max-response-time | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/robustness | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/last-member-query -interval | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-aging | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces /mrouter-interface | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces /mrouter-interface/interface | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces /mrouter-interface/type | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mvlan | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mvlan/user-vlans | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/enable | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/fast-leave | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/proxy-enable | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/querier-enable | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/querier-ip | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/version | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/query-interval | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/robustness | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mvlan | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mvlan/user-vlans | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/group-limits | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit/interface | Read-Write |
/?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit/max-group | Read-Write |
Detailed Nodes
/igmp-mld-snooping
Path /igmp-mld-snooping
Node Type container
Description Config the igmp-snooping and mld-snooping function of the system.
Access Read-Write
/igmp-mld-snooping/global
Path /igmp-mld-snooping/global
Node Type container
Access Read-Write
/igmp-mld-snooping/global/enabled
Path /igmp-mld-snooping/global/enabled
Node Type leaf
Description Enable l2 multicast functionality on system level. The multicast container is disabled by default. If the device needs to forward and learn multicast data, this must be enabled.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/igmp-mld-snooping/groups
Path /igmp-mld-snooping/groups
Node Type container
Description The group of snooping multicast.
Access Read-Write
/igmp-mld-snooping/groups/group
Path /igmp-mld-snooping/groups/group
Node Type list
Description The list of l2 snooping multicast groups.
Access Read-Write
/igmp-mld-snooping/groups/group/dst-ip
Path /igmp-mld-snooping/groups/group/dst-ip
Node Type leaf
Description The destination group address.
Access Read-Write
Data Type <YANG type ip-address-no-zone>
Constraints Multiple constraints: An IPv6 address without a zone index. This type, derived from the type ipv6-address, may be used in situations where the zone is known from the context and no zone index is needed. An IPv4 address without a zone index. This type, derived from the type ipv4-address, may be used in situations where the zone is known from the context and no zone index is needed.
Mandatory Yes
/igmp-mld-snooping/groups/group/src-ip
Path /igmp-mld-snooping/groups/group/src-ip
Node Type leaf
Description The source group address. If the src-ip is 0.0.0.0 or 0::0, this static group is (*,G) group, otherwise this static group is (G,S) group.
Access Read-Write
Data Type <YANG type ip-address-no-zone>
Constraints Multiple constraints: An IPv6 address without a zone index. This type, derived from the type ipv6-address, may be used in situations where the zone is known from the context and no zone index is needed. An IPv4 address without a zone index. This type, derived from the type ipv4-address, may be used in situations where the zone is known from the context and no zone index is needed.
Mandatory Yes
/igmp-mld-snooping/groups/group/vlan
Path /igmp-mld-snooping/groups/group/vlan
Node Type leaf
Description The vlan id of the multicast group.
Access Read-Write
Data Type <YANG type vlan-id>
Constraints Valid range: 1 to 4094
Mandatory Yes
/igmp-mld-snooping/groups/group/output-interfaces
Path /igmp-mld-snooping/groups/group/output-interfaces
Node Type container
Access Read-Write
/igmp-mld-snooping/groups/group/output-interfaces/output-interface
Path /igmp-mld-snooping/groups/group/output-interfaces/output-interface
Node Type list
Access Read-Write
Constraints Has local type
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/interface
Path /igmp-mld-snooping/groups/group/output-interfaces/output-interface/interface
Node Type leaf
Description The egress L2 port of the multicast group.
Access Read-Write
Data Type <YANG type union>
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/uvlan
Path /igmp-mld-snooping/groups/group/output-interfaces/output-interface/uvlan
Node Type leaf
Description The user vlan id of the output interface. Currently, the user vlan id need to be the same as the vlan id in parent node.
Access Read-Write
Data Type <YANG type vlan-id>
Constraints Valid range: 1 to 4094
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/mode
Path /igmp-mld-snooping/groups/group/output-interfaces/output-interface/mode
Node Type leaf
Description The filter mode of the multicast group. The include mode means that the output interface is included in the multicast group. The exclude mode means that the output interface is excluded from the multicast group.
Access Read-Write
Data Type <YANG type enumeration>
Constraints Enumeration with options: include/exclude
/igmp-mld-snooping/groups/group/output-interfaces/output-interface/type
Path /igmp-mld-snooping/groups/group/output-interfaces/output-interface/type
Node Type leaf
Description The mode of the multicast group. The static group is configured by user, and the dynamic group is learned by device.
Access Read-Only
Data Type <YANG type enumeration>
Constraints Enumeration with options: static/dynamic
/?/vlans/vlan/igmp-mld-snooping
Path /?/vlans/vlan/igmp-mld-snooping
Node Type container
Description Config the igmp-snooping and mld-snooping of VLAN
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/enable
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/enable
Node Type leaf
Description Enable IGMP or MLD Snooping for the VLAN.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/fast-leave
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/fast-leave
Node Type leaf
Description Enable fast leave of multicast groups for member interfaces. When an IGMP or MLD Leave message from a host is received indicating the host is leaving a multicast group, the device will directly delete the corresponding multicast group forwarding table entry for that host without sending a specific group query message.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/proxy-enable
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/proxy-enable
Node Type leaf
Description The proxy config of snooping. After enabling the IGMP Snooping Proxy feature, it can replace the router to send IGMP Query messages and receive IGMP Report/Leave messages sent by users, thereby alleviating the pressure on routing devices when there are a large number of terminals in the network.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/querier-enable
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/querier-enable
Node Type leaf
Description Enable IGMP or MLD querier. Configuring a querier on the device allows it to replace upstream devices in sending IGMP Query messages. The device will periodically broadcast IGMP Query messages to all interfaces within the VLAN (including router ports). If an IGMP querier already exists in the multicast network, enabing querier of device may trigger a re-election of the IGMP querier.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/querier-ip
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/querier-ip
Node Type leaf
Description Configure the source IP address of the IGMP or MLD Query message. When there are multiple queriers in the network, the querier selection can be controlled by modifying the source IP address of the device's query message.
Access Read-Write
Data Type <YANG type ip-address>
Constraints Multiple constraints: The ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007. The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format.
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/version
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/version
Node Type leaf
Description The version of the snooping. For igmp-snooping, the default version is v2. For mld-snooping, the default version is v1.
Access Read-Write
Data Type <YANG type enumeration>
Constraints Enumeration with options: v1/v2/v3
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/query-interval
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/query-interval
Node Type leaf
Description The interval time between the general query messages sent by the device.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 18000
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/query-max-response-time
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/query-max-response-time
Node Type leaf
Description The maximum response time for query messages. It should be ensured that the interval time between the querier's general query messages is greater than the maximum response time for downstream hosts to reply to the querier. Otherwise, it may result in the device mistakenly deleting member entries.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 25
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/robustness
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/robustness
Node Type leaf
Description The number of specific group query messages sent by the querier to avoid potential network packet loss. When an IGMP Leave message for a specific multicast group is received, a configured number of specific group query messages will be sent to inquire whether there are still members in that multicast group.
Access Read-Write
Data Type <YANG type uint8>
Constraints Valid range: 1 to 255
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/last-member-query-interval
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/snooping/last-member-query-interval
Node Type leaf
Description The interval time for the querier to send specific group query messages.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 100 to 25500
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter
Node Type container
Description The multicast router of vlan
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-aging
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-aging
Node Type leaf
Description The aging time for dynamic router ports within the VLAN. If no IGMP Query or PIM Hello messages are received within the dynamic router port aging time, the port is considered no longer to belong to a router port.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 1000
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface
Node Type list
Access Read-Write
Constraints Has local type
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface
Node Type leaf
Description Configure the interface as a static router port for the VLAN.
Access Read-Write
Data Type <YANG type union>
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface/type
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface/type
Node Type leaf
Description The type of the multicast router.
Access Read-Write
Data Type <YANG type enumeration>
Constraints Enumeration with options: static/dynamic
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mvlan
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mvlan
Node Type container
Description The multicast vlan config. When users in different VLANs need to receive multicast data from the same multicast source, the device needs to replicate the data for each VLAN. In this case, you can configure a multicast VLAN by setting the user VLAN as the user VLAN and the router port VLAN as the multicast VLAN. The multicast VLAN will replicate the data to the user VLAN. IGMP Snooping must be enabled in both the multicast VLAN and the user VLAN.
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mvlan/user-vlans
Path /?/vlans/vlan/igmp-mld-snooping/igmp-snooping/mvlan/user-vlans
Node Type leaf-list
Description The user vlan of snooping.
Access Read-Write
Data Type <YANG type vlan-id>
Constraints Valid range: 1 to 4094
/?/vlans/vlan/igmp-mld-snooping/mld-snooping
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/enable
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/enable
Node Type leaf
Description Enable IGMP or MLD Snooping for the VLAN.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/fast-leave
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/fast-leave
Node Type leaf
Description Enable fast leave of multicast groups for member interfaces. When an IGMP or MLD Leave message from a host is received indicating the host is leaving a multicast group, the device will directly delete the corresponding multicast group forwarding table entry for that host without sending a specific group query message.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/proxy-enable
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/proxy-enable
Node Type leaf
Description The proxy config of snooping. After enabling the IGMP Snooping Proxy feature, it can replace the router to send IGMP Query messages and receive IGMP Report/Leave messages sent by users, thereby alleviating the pressure on routing devices when there are a large number of terminals in the network.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/querier-enable
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/querier-enable
Node Type leaf
Description Enable IGMP or MLD querier. Configuring a querier on the device allows it to replace upstream devices in sending IGMP Query messages. The device will periodically broadcast IGMP Query messages to all interfaces within the VLAN (including router ports). If an IGMP querier already exists in the multicast network, enabing querier of device may trigger a re-election of the IGMP querier.
Access Read-Write
Data Type <YANG type boolean>
Constraints Valid in [true, false]
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/querier-ip
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/querier-ip
Node Type leaf
Description Configure the source IP address of the IGMP or MLD Query message. When there are multiple queriers in the network, the querier selection can be controlled by modifying the source IP address of the device's query message.
Access Read-Write
Data Type <YANG type ip-address>
Constraints Multiple constraints:
- The ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007.
- The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/version
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/version
Node Type leaf
Description The version of the snooping. For igmp-snooping, the default version is v2. For mld-snooping, the default version is v1.
Access Read-Write
Data Type <YANG type enumeration>
Constraints Enumeration with options: v1/v2/v3
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/query-interval
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/query-interval
Node Type leaf
Description The interval time between the general query messages sent by the device.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 18000
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time
Node Type leaf
Description The maximum response time for query messages. It should be ensured that the interval time between the querier's general query messages is greater than the maximum response time for downstream hosts to reply to the querier. Otherwise, it may result in the device mistakenly deleting member entries.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 25
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/robustness
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/robustness
Node Type leaf
Description The number of specific group query messages sent by the querier to avoid potential network packet loss. When an IGMP Leave message for a specific multicast group is received, a configured number of specific group query messages will be sent to inquire whether there are still members in that multicast group.
Access Read-Write
Data Type <YANG type uint8>
Constraints Valid range: 1 to 255
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval
Node Type leaf
Description The interval time for the querier to send specific group query messages.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 100 to 25500
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter
Node Type container
Description The multicast router of vlan
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging
Node Type leaf
Description The aging time for dynamic router ports within the VLAN. If no IGMP Query or PIM Hello messages are received within the dynamic router port aging time, the port is considered no longer to belong to a router port.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 1000
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface
Node Type list
Access Read-Write
Constraints Has local type
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface
Node Type leaf
Description Configure the interface as a static router port for the VLAN.
Access Read-Write
Data Type <YANG type union>
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type
Node Type leaf
Description The type of the multicast router.
Access Read-Write
Data Type <YANG type enumeration>
Constraints Enumeration with options: static/dynamic
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mvlan
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mvlan
Node Type container
Description The multicast vlan config. When users in different VLANs need to receive multicast data from the same multicast source, the device needs to replicate the data for each VLAN. In this case, you can configure a multicast VLAN by setting the user VLAN as the user VLAN and the router port VLAN as the multicast VLAN. The multicast VLAN will replicate the data to the user VLAN. IGMP Snooping must be enabled in both the multicast VLAN and the user VLAN.
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/mld-snooping/mvlan/user-vlans
Path /?/vlans/vlan/igmp-mld-snooping/mld-snooping/mvlan/user-vlans
Node Type leaf-list
Description The user vlan of snooping.
Access Read-Write
Data Type <YANG type vlan-id>
Constraints Valid range: 1 to 4094
/?/vlans/vlan/igmp-mld-snooping/group-limits
Path /?/vlans/vlan/igmp-mld-snooping/group-limits
Node Type container
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit
Path /?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit
Node Type list
Description The maximum number of multicast groups (igmp-snooping and mld-snooping) that an interface of vlan can learn. When the maximum number of learning groups for the interface is modified, forwarding groups that exceed the limit will be learned into the IGMP or MLD process memory but will not be programmed to the chip.
Access Read-Write
/?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit/interface
Path /?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit/interface
Node Type leaf
Description The egress L2 port of the multicast group.
Access Read-Write
Data Type <YANG type union>
/?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit/max-group
Path /?/vlans/vlan/igmp-mld-snooping/group-limits/group-limit/max-group
Node Type leaf
Description The max number of the multicast group on this port of the vlan, default is 4095.
Access Read-Write
Data Type <YANG type uint16>
Constraints Valid range: 1 to 4094