Command Line Reference
MACsec Configuration
\[Command] show macsec profile \[Purpose] Display MACsec tunnel policy information for the current configuration. \[View] System view \[Use Cases] \[Command] show macsec interface \[Purpose] Display the binding relationship between MACsec policies and physical interfaces.
SRv6 Tunnel Configuration
\[Command] show segment-routing srv6 locator \[Purpose] Display the SRv6 locator configuration for the current configuration \[View] System View \[Use Cases] \[Command] show segment-routing srv6 local sid \[Purpose] Display the currently active SID table entries for the device \[View] System View \[Use Cases] \[Command] show segment-routing srv6 manager \[Purpose] Display the source IP address for the currently configured SRV6 encapsulation \[View] System View \[Use Cases] \[Command] show bgp segment-routing srv6 \[Purpose] Display BGP and SRV6 binding information \[View] System View \[Use Cases] \[Command] locator locator name no locator locator name \[Purpose] Bind the SRv6 locator in the corresponding view \[Parameter] \[View] ISIS/BGP SRv6 Configuration Overview \[Use Cases] \[Command] source-address X\ X X\ X no source-address \[Purpose] Configure the source IP in the SRV6 tunnel header to a specified IPv6 address \[View] Encapsulation Configuration View \[Use Cases] \[Command] prefix X\ X X\ X/M no prefix \[Purpose] Specify the address prefix used by the SRV6 locator \[View] Locator Configuration View \[Notes] Only one instance of this prefix can be configured within a single locator. \[Use Cases] \[Command] sid vpn per-vrf export {auto| value } no sid vpn per-vrf export \[Purpose] Configure SID entries \[Parameter] \[View] BGP Configuration Views \[Use Cases] \[Command] sid vpn export {auto| value } no sid vpn export \[Purpose] Configure SID entries \[Parameter] \[View] BGP Address Family Configuration Views \[Use Cases] \[Command] sid vpn export {auto| value } no sid vpn export \[Purpose] Configure SID entries \[Parameter] \[View] BGP Address Family Configuration Views \[Use Cases] \[Command] ipv6 route X\ X X\ X/M XX XX segments sid number / sid number no ipv6 route X\ X X\ X/M XX XX \[Purpose] Configure static SRV6 routing and specify the SRv6 forwarding path \[Parameter] \[View] VRF Configuration View \[Notes] The final node in the SRv6 forwarding path must use the addresses SID END.