RPCs

Path /config-vlan-group/input Node Type container Access Read-Write

Path /config-vlan-group/input/vlan-ranges Node Type leaf Description Ranges of VLAN IDs, e.g. 100-200,300-400 Access Read-Write Data Type <YANG type vlan-range> Constraints Type definition representing a range of single-tagged VLANs. A range is specified as x-y where x and y are valid VLAN IDs (1 <= vlan-id <= 4094). The range is assumed to be inclusive, such that any VLAN-ID matching x <= VLAN-ID <= y falls within the range. If there is more than one range, use the expression x1-y1,x2-y2

Path /config-vlan-group/input/mac-limit Node Type leaf Description Limit the number of dynamic MAC addresses to be learned: when the mac number reaches the threshold, dynamic MAC addresses are no longer learned. 0 means no limit. Access Read-Write Data Type <YANG type uint32> Constraints Valid range: 0 to 32000

Path /config-vlan-group/input/mac-learning Node Type leaf Description Set mac-learning mode for vlan, if disable, vlan will not learn mac Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/description Node Type leaf Description Set textual description of the vlan Access Read-Write Data Type <YANG type string> Constraints String with length: 1 to 127

Path /config-vlan-group/input/unknown-unicast-action Node Type leaf Description Set the unknown unicast packets forwarding action Access Read-Write Data Type <YANG type vlan-bum-action> Constraints Enumeration with options: flood drop

Path /config-vlan-group/input/unknown-multicast-action Node Type leaf Description Set the unknown multicast packets forwarding action Access Read-Write Data Type <YANG type vlan-bum-action> Constraints Enumeration with options: flood drop

Path /config-vlan-group/input/broadcast-action Node Type leaf Description Set the broadcast packets forwarding action Access Read-Write Data Type <YANG type vlan-bum-action> Constraints Enumeration with options: flood drop

Path /config-vlan-group/input/stp-ignored Node Type leaf Description Ignore STP BPDU. If enabled, the VLAN will not participate in the processing of the STP state machine. Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/flapping-detect Node Type leaf Description Set mac flapping detection enable Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/flapping-action Node Type leaf Description Set interface shutdown when mac-flapping is detected Access Read-Write Data Type <YANG type identityref> Constraints IdentityRef with options: none error-down

Path /config-vlan-group/input/flapping-aging Node Type leaf Description Set mac-flapping detection time window in seconds Access Read-Write Data Type <YANG type uint16> Constraints Valid range: 10 to 7200

Path /config-vlan-group/input/flapping-level Node Type leaf Description Set mac-flapping detection times Access Read-Write Data Type <YANG type uint16> Constraints Valid range: 5 to 500

Path /config-vlan-group/input/igmp-mld-snooping Node Type container Description Config the igmp-snooping and mld-snooping of VLAN Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/igmp-snooping Node Type container Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping Node Type container Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/enable Node Type leaf Description Enable IGMP or MLD Snooping for the VLAN. Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/fast-leave Node Type leaf Description Enable fast leave of multicast groups for member interfaces. When an IGMP or MLD Leave message from a host is received indicating the host is leaving a multicast group, the device will directly delete the corresponding multicast group forwarding table entry for that host without sending a specific group query message. Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/proxy-enable Node Type leaf Description The proxy config of snooping. After enabling the IGMP Snooping Proxy feature, it can replace the router to send IGMP Query messages and receive IGMP Report/Leave messages sent by users, thereby alleviating the pressure on routing devices when there are a large number of terminals in the network. Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-enable Node Type leaf Description Enable IGMP or MLD querier. Configuring a querier on the device allows it to replace upstream devices in sending IGMP Query messages. The device will periodically broadcast IGMP Query messages to all interfaces within the VLAN (including router ports). If an IGMP querier already exists in the multicast network, enabing querier of device may trigger a re-election of the IGMP querier. Access Read-Write Data Type <YANG type boolean> Constraints Valid in [true, false]

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-ip Node Type leaf Description Configure the source IP address of the IGMP or MLD Query message. When there are multiple queriers in the network, the querier selection can be controlled by modifying the source IP address of the device's query message. Access Read-Write Data Type <YANG type ip-address> Constraints Multiple constraints:

If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007.

The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/version Node Type leaf Description The version of the snooping. For igmp-snooping, the default version is v2. For mld-snooping, the default version is v1. Access Read-Write Data Type <YANG type enumeration> Constraints Enumeration with options: v1 v2 v3

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-interval Node Type leaf Description The interval time between the general query messages sent by the device. Access Read-Write Data Type <YANG type uint16> Constraints Valid range: 1 to 18000

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time Node Type leaf Description The maximum response time for query messages. It should be ensured that the interval time between the querier's general query messages is greater than the maximum response time for downstream hosts to reply to the querier. Otherwise, it may result in the device mistakenly deleting member entries. Access Read-Write Data Type <YANG type uint16> Constraints Valid range: 1 to 25

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/robustness Node Type leaf Description The number of specific group query messages sent by the querier to avoid potential network packet loss. When an IGMP Leave message for a specific multicast group is received, a configured number of specific group query messages will be sent to inquire whether there are still members in that multicast group. Access Read-Write Data Type <YANG type uint8> Constraints Valid range: 1 to 255

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval Node Type leaf Description The interval time for the querier to send specific group query messages. Access Read-Write Data Type <YANG type uint16> Constraints Valid range: 100 to 25500

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter Node Type container Description The multicast router of vlan Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging Node Type leaf Description The aging time for dynamic router ports within the VLAN. If no IGMP Query or PIM Hello messages are received within the dynamic router port aging time, the port is considered no longer to belong to a router port. Access Read-Write Data Type <YANG type uint16> Constraints Valid range: 1 to 1000

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces Node Type container Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface Node Type list Access Read-Write Constraints Has local type

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface Node Type leaf Description Configure the interface as a static router port for the VLAN. Access Read-Write Data Type <YANG type union>

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type Node Type leaf Description The type of the multicast router. Access Read-Write Data Type <YANG type enumeration> Constraints Enumeration with options: static dynamic

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan Node Type container Description The multicast vlan config. When users in different VLANs need to receive multicast data from the same multicast source, the device needs to replicate the data for each VLAN. In this case, you can configure a multicast VLAN by setting the user VLAN as the user VLAN and the router port VLAN as the multicast VLAN. The multicast VLAN will replicate the data to the user VLAN. IGMP Snooping must be enabled in both the multicast VLAN and the user VLAN. Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan/user-vlans Node Type leaf-list Description The user vlan of snooping. Access Read-Write Data Type <YANG type vlan-id> Constraints Valid range: 1 to 4094

Path /config-vlan-group/input/igmp-mld-snooping/group-limits

Node Type container

Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit

Node Type list

Description The maximum number of multicast groups (igmp-snooping and mld-snooping) that an interface of vlan can learn. When the maximum number of learning groups for the interface is modified, forwarding groups that exceed the limit will be learned into the IGMP or MLD process memory but will not be programmed to the chip.

Access Read-Write

Path /config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/interface

Node Type leaf

Description The egress L2 port of the multicast group.

Access Read-Write

Data Type <YANG type union>

Path /config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/max-group

Node Type leaf

Description The max number of the multicast group on this port of the vlan, default is 4095.

Access Read-Write

Data Type <YANG type uint16>

Constraints Valid range: 1 to 4094

Path /config-vlan-group/input/interfaces

Node Type container

Description Interface-specific loopback detection configuration for VLANs

Access Read-Write

Path /config-vlan-group/input/interfaces/interface

Node Type list

Description Interface entry for VLAN loopback configuration

Access Read-Write

Path /config-vlan-group/input/interfaces/interface/name

Node Type leaf

Description The name of the interface to be configured for loopback detection. User can configure loopback detection on Ethernet interfaces and VLAN. For example, Ethernet1, Ethernet2, Vlan10, Vlan20, etc.

Access Read-Write

Data Type <YANG type union>

Path /config-vlan-group/input/interfaces/interface/status

Node Type leaf

Description Enable or disable loopback detection on the interface. When loopback detection is enabled, the system will periodically send loopback detection packets. If a loop is detected, the configured action will be applied to the interface. If this is applied to a VLAN, all ports in the VLAN will be affected: once a port in this VLAN receives a detection packet sending from this vlan's members, it will trigger the configured action. If this is applied to an interface, only the specified interface will be affected: only when the interface receives a detection packet sending from itself, it will trigger the configured action.

Access Read-Write

Data Type <YANG type enumeration>

Constraints Enumeration with options: enable disable

Path /config-vlan-group/input/router-advertisement

Node Type container

Description Support for IPv6 Router Advertisements.

Access Read-Write

Constraints When condition: ../../name[starts-with(text(), 'Vlan')]

Path /config-vlan-group/input/router-advertisement/managed-flag

Node Type leaf

Description The value to be placed in the 'Managed address configuration' flag field in the Router Advertisement.

Access Read-Write

Data Type <YANG type boolean>

Constraints Valid in [true, false]

Path /config-vlan-group/input/router-advertisement/other-config-flag

Node Type leaf

Description The value to be placed in the 'Other configuration' flag field in the Router Advertisement.

Access Read-Write

Data Type <YANG type boolean>

Constraints Valid in [true, false]

Path /config-vlan-group/input/router-advertisement/link-mtu

Node Type leaf

Description The value to be placed in MTU options sent by the router. A value of zero indicates that no MTU options are sent.

Access Read-Write

Data Type <YANG type mtu-type>

Constraints Valid range: 1312 to 9216

Path /config-vlan-group/input/router-advertisement/on-link-flag

Node Type leaf

Description The value to be placed in the on-link flag ('L-bit') field in the Prefix Information option.

Access Read-Write

Data Type <YANG type boolean>

Constraints Valid in [true, false]

Path /config-vlan-group/input/router-advertisement/autonomous-flag

Node Type leaf

Description The value to be placed in the Autonomous Flag field in the Prefix Information option.

Access Read-Write

Data Type <YANG type boolean>

Constraints Valid in [true, false]

Path /config-vlan-group/input/router-advertisement/prefixes

Node Type list

Description Support for an advertised prefix entry.

Access Read-Write

Path /config-vlan-group/input/router-advertisement/prefixes/prefix

Node Type leaf

Description IPv6 address prefix.

Access Read-Write

Data Type <YANG type ipv6-prefix>

Constraints The ipv6-prefix type represents an IPv6 prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952. The definition of ipv6-prefix does not require that bits, which are not part of the prefix, are set to zero. However, implementations have to return values in canonical format, which requires non-prefix bits to be set to zero. This means that 2001:db8::1/64 must be accepted as a valid value but it will be converted into the canonical format 2001:db8::/64.

Path /config-vlan-group/input/router-advertisement/rdnsses

Node Type list

Description Support for an advertised prefix entry.

Access Read-Write

Path /config-vlan-group/input/router-advertisement/rdnsses/rdnss

Node Type leaf

Description IPv6 address.

Access Read-Write

Data Type <YANG type ipv6-address-no-zone>

Constraints An IPv6 address without a zone index. This type, derived from the type ipv6-address, may be used in situations where the zone is known from the context and no zone index is needed.

Path /config-vlan-group/input/router-advertisement/routes

Node Type list

Description Support for an advertised prefix entry.

Access Read-Write

Path /config-vlan-group/input/router-advertisement/routes/route

Node Type leaf

Description IPv6 address prefix.

Access Read-Write

Data Type <YANG type ipv6-prefix>

Constraints The ipv6-prefix type represents an IPv6 prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952. The definition of ipv6-prefix does not require that bits, which are not part of the prefix, are set to zero. However, implementations have to return values in canonical format, which requires non-prefix bits to be set to zero. This means that 2001:db8::1/64 must be accepted as a valid value but it will be converted into the canonical format 2001:db8::/64.

Path /config-vlan-group/input/router-advertisement/routes/preferred

Node Type leaf

Description The value to be placed in the Route Preference in the Route Information option. The preference associated with the default router, as either 'low', 'medium', or 'high'.

Access Read-Write

Data Type <YANG type enumeration>

Constraints Enumeration with options: low medium high

Path /config-vlan-group/input/switchports

Node Type leaf-list

Description switchport trunk interface list

Access Read-Write

Data Type <YANG type union>

Path /delete-vlan-group/input

Node Type container

Access Read-Write

Path /delete-vlan-group/input/vlan-ranges

Node Type leaf

Description Ranges of VLAN IDs, e.g. 100-200,300-400

Access Read-Write

Data Type <YANG type vlan-range>

Constraints Type definition representing a range of single-tagged VLANs. A range is specified as x-y where x and y are valid VLAN IDs (1 <= vlan-id <= 4094). The range is assumed to be inclusive, such that any VLAN-ID matching x <= VLAN-ID <= y falls within the range. If there is more than one range, use the expression x1-y1,x2-y2

Path /delete-vlan-group-switchports/input

Node Type container

Access Read-Write

Path /delete-vlan-group-switchports/input/vlan-ranges

Node Type leaf

Description Ranges of VLAN IDs, e.g. 100-200,300-400

Access Read-Write

Data Type <YANG type vlan-range>

Constraints Type definition representing a range of single-tagged VLANs. A range is specified as x-y where x and y are valid VLAN IDs (1 <= vlan-id <= 4094). The range is assumed to be inclusive, such that any VLAN-ID matching x <= VLAN-ID <= y falls within the range. If there is more than one range, use the expression x1-y1,x2-y2

Path /delete-vlan-group-switchports/input/switchports

Node Type leaf-list

Description switchport trunk interface list

Access Read-Write

Data Type <YANG type union>

Path /show-vlan-summary/output

Node Type container

Access Read-Write

Path /show-vlan-summary/output/data

Node Type anydata

Description A table that shows information of all vlans

Access Read-Write

Path /show-vlan-detail/input

Node Type container

Access Read-Write

Path /show-vlan-detail/input/vlan-id

Node Type leaf

Description VLAN ID

Access Read-Write

Data Type <YANG type union>

Constraints Valid range: 1 to 4094

Path /show-vlan-detail/output

Node Type container

Access Read-Write

Path /show-vlan-detail/output/data

Node Type anydata

Description A text that shows information of the specified vlan or all.

Access Read-Write

Path /show-mac-flapping-config/input

Node Type container

Access Read-Write

Path /show-mac-flapping-config/input/vlan-id

Node Type leaf

Description VLAN ID

Access Read-Write

Data Type <YANG type union>

Constraints Valid range: 1 to 4094

Path /show-mac-flapping-config/output

Node Type container

Access Read-Write

Path /show-mac-flapping-config/output/data

Node Type container

Access Read-Write

Path /show-mac-flapping-config/output/data/mac-flapping-config

Node Type list

Description MAC flapping configuration list

Access Read-Write

Path /show-mac-flapping-config/output/data/mac-flapping-config/vlan-id

Node Type leaf

Description VLAN ID

Access Read-Write

Data Type <YANG type vlan-id>

Constraints Valid range: 1 to 4094

Path /show-mac-flapping-config/output/data/mac-flapping-config/flapping-detect

Node Type leaf

Description Set mac flapping detection enable

Access Read-Write

Data Type <YANG type boolean>

Constraints Valid in [true, false]

Path /show-mac-flapping-config/output/data/mac-flapping-config/flapping-action

Node Type leaf

Description Set interface shutdown when mac-flapping is detected

Access Read-Write

Data Type <YANG type identityref>

Constraints IdentityRef with options: none error-down

Path /show-mac-flapping-config/output/data/mac-flapping-config/flapping-aging

Node Type leaf

Description Set mac-flapping detection time window in seconds

Access Read-Write

Data Type <YANG type uint16>

Constraints Valid range: 10 to 7200

Path /show-mac-flapping-config/output/data/mac-flapping-config/flapping-level

Node Type leaf

Description Set mac-flapping detection times

Access Read-Write

Data Type <YANG type uint16>

Constraints Valid range: 5 to 500

Path /show-mac-flapping-status/input

Node Type container

Access Read-Write

Path /show-mac-flapping-status/input/vlan-id

Node Type leaf

Description VLAN ID

Access Read-Write

Data Type <YANG type union>

Constraints Valid range: 1 to 4094

Path /show-mac-flapping-status/output

Node Type container

Access Read-Write

Path /show-mac-flapping-status/output/data

Node Type container

Access Read-Write

Path /show-mac-flapping-status/output/data/mac-flapping-status

Node Type list

Description MAC flapping status list

Access Read-Write

Path /show-mac-flapping-status/output/data/mac-flapping-status/vlan-id

Node Type leaf

Description VLAN ID

Access Read-Write

Data Type <YANG type vlan-id>

Constraints Valid range: 1 to 4094

Path /show-mac-flapping-status/output/data/mac-flapping-status/mac-address

Node Type leaf

Description Show Migrated MAC addresses when MAC flapping.

Access Read-Write

Data Type <YANG type string>

Path /show-mac-flapping-status/output/data/mac-flapping-status/flapping-times

Node Type leaf

Description Show number of migrations for a MAC address.

Access Read-Write

Data Type <YANG type uint16>

Path /show-mac-flapping-status/output/data/mac-flapping-status/last-update

Node Type leaf

Description Show time info of last migration.

Access Read-Write

Data Type <YANG type string>

Path /show-mac-flapping-status/output/data/mac-flapping-status/interface-status

Node Type leaf

Description Show interface status(whether the interface is shut down).

Access Read-Write

Data Type <YANG type string>

Path /clear-mac-flapping-status/input

Node Type container

Access Read-Write

Path /clear-mac-flapping-status/input/vlan-id

Node Type leaf

Description VLAN ID

Access Read-Write

Data Type <YANG type union>

Constraints Valid range: 1 to 4094

Path /clear-mac-flapping-status/output

Node Type container

Access Read-Write

Path /clear-mac-flapping-status/output/result

Node Type leaf

Description Operation result

Access Read-Write

Data Type <YANG type string>