Services Configuration
Scene Selection
To simplify the configuration of common typical network setups, the controller has four built-in scenarios Small/Mid-Scale Campus, Large/Mid-Scale Campus, Traditional L2 Network, and Open Cloud Connect. Administrators can select any network setup according to the network scale to complete topology planning.
Design Topology
Users can click the \[Edit] button on the device side, select devices from the inventory to be applied to the current topology in the slide-out panel on the right, and then choose interconnection interfaces. Or click \[Import Configuration] in the upper right corner of the page to import the configuration.
Basic Network
Except for the Open Cloud Connect scenario, the other three scenarios all require basic network configuration. Click \[Basic Network] to enter the Basic Network Configuration interface to configure the basic network that carries the service network, including the routing protocols between Leaf and Spine, and between Spine and up-link devices.
Switch Configuration
Users need to configure the service vlans and IP gateways required for the switch in the switch configuration section, and configure the DHCP server or specify the IP address of the DHCP server. Multiple business vlans can be added as needed to handle different business requirements.
WiFi Configuration
Click \[WiFi Configuration] - \[+] - \[Create Configuration] to configure the necessary basic information for the wireless AP, e. g.
OLT Stick Configuration
On the \[Devices] view, click on the OLT device identifier that needs to be configured to enter the device overview. Users can view the basic information of this OLT on this view.