Syslog Configuration
show syslog config
[Command] show syslog config
[Purpose] Show the syslog configuration
[View] System View
[Use Cases]
sonic# show syslog config
Src Interface Protocol Port Server IP
--------------- --------------- ------------
eth0 192.168.0.78syslog source-interface
[Command] syslog source-interface {etherent|loopback|vlan|mgmt} interface_name no syslog source-interface
[Purpose] Configure the source interface for the device to send syslog packets
[Parameter]
Parameter | Description |
|---|---|
{etherent|loopback|vlan|mgmt} interface_name | Specify the source as a service interface or a specific Loopback port |
[View] System configuration view
[Use Cases]
sonic(config)# syslog source-interface loopback 0
Syslog source interface set to Loopback0
Restarting rsyslog-config service...
sonic(config)#syslog
[Command] syslog ip_address no syslog ip_address
[Purpose] Specify the syslog server
[Parameter]
Parameter | Description |
|---|---|
ip_address | IPv4 or IPv6 address |
[View] System configuration view
[Usage Scenario] Syslog can be used to log messages locally in files or sent over the network to a syslog server. The syslog server can centrally store syslog messages from multiple devices.
[Use Cases]
sonic(config)# syslog 10.1.1.10syslog protocol-port
[Command] syslog protocol-port port no syslog protocol-port
[Purpose] Set syslog protocol port configuration, default 514
[Parameter]
Parameter | Description |
|---|---|
port | protocol port configuration, default 514,range 0-65535 |
[View] System configuration view
[Use Cases]
sonic(config)# syslog protocol-port 513