SLA
show sla brief
[Command] show sla brief
[Purpose] Display the information about SLA
[View] System view
[Use Cases]
sonic# show sla brief
===================================icmp_echo====================================
Sla_id type dst_ip min_time avg_time max_time packt_loss
-------- --------- ----------- ---------- ---------- ---------- ------------
1 icmp_echo 150.1.0.2 0.63 0.762 0.857 0%
==================================user_define===================================
Sla_id type dst_ip customer_file_path
-------- ------ -------- --------------------sla
[Command] sla ID icmp-echo dst-ip { A.B.C.D |A::B } [src-port interface_type interface_name] [timeout time] [frequency interval]
[Purpose] Configure SLA
[Parameter]
Parameter | Description |
|---|---|
ID | SLA instance ID |
A.B.C.D|A::B | The IP address monitored by the SLA instance |
interface_type interface_name | Specifies the source of the probe packet |
timeout time | The probe timeout waiting timeout range is 1-3600, the unit is s, and the default value is 5 |
frequency interval | The detection packet transmission interval, the value range: 1-3600, the unit: s, the default value is 10 |
[View] System configure view
[Usage Scenario] Configure SLA (Service Level Agreement) to measure network performance and reliability. By sending ICMP (Internet Control Message Protocol) request packets to a specified IP address, it probes whether the IP address is reachable. This helps network administrators determine the optimal data transmission path.
[Use Cases]
sonic(config)# sla 1 icmp-echo dst-ip 150.1.0.2 src-port ethernet 49